Dell Alienware 18 (Mid 2013) - Manual (Page 18)

18 | Removing the Memory Module(s)
Removing the Memory Module(s)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
NOTE: Your computer supports up to four memory module connectors. You can
access connectors DIMM3 and DIMM4 by removing the base cover at the bottom of
your computer. You can access connectors DIMM1 and DIMM2 by removing the
keyboard.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 7.
2 Remove the battery. See "Removing the Battery Pack" on page 16.
Book.book Page 18 Friday, June 28, 2013 11:10 AM