Dell Alienware 18 (Mid 2013) - Manual (Page 63)

Replacing the Camera Module | 63
Replacing the Camera Module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Adhere the camera module to the display back-cover.
2 Connect the camera cable to the camera-module connector.
3 Replace the screw that secures the camera module to the display back-cover.
Postrequisites
1 Replace the display bezel. See "Replacing the Display Bezel" on page 65.
2 Replace the display assembly. See "Replacing the Display Assembly" on page 60.
3 Follow the instructions from step 3 to step 6 in Replacing the Palm Rest.
4 Replace the optical drive. See "Replacing the Optical Drive" on page 24.
5 Replace the hard drive(s). See “Replacing the Hard Drive(s)” on page 28.
6 Replace the battery pack. See "Replacing the Battery Pack" on page 17.
7 Replace the fans cover. See "Replacing the Fans Cover" on page 30.
8 Replace the base cover. See "Replacing the Base Cover" on page 15.
9 Replace any card or blank that you removed from the Media-Card Reader.
10 Follow the instructions in "After Working Inside Your Computer" on page 13.
Book.book Page 63 Friday, June 28, 2013 11:10 AM