Dell Alienware 18 (Mid 2013) - Manual (Page 56)

56 | Removing the Display Assembly
Removing the Display Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove any installed card or blank from the Media-Card Reader.
2 Remove the base cover. See "Removing the Base Cover" on page 14.
3 Remove the fans cover. See "Removing the Fans Cover" on page 29.
4 Remove the battery pack. See "Removing the Battery Pack" on page 16.
5 Remove the hard drive. See “Removing the Hard Drive(s)” on page 25.
6 Remove the optical drive. See "Removing the Optical Drive" on page 22.
7 Follow the instructions from step 1 to step 6 in Removing the Palm Rest.
Procedure
1 Close the display and turn the computer over.
2 Remove the screws that secure the display assembly to the computer base.
1 screws (4)
1
Book.book Page 56 Friday, June 28, 2013 11:10 AM