Dell Alienware 18 (Mid 2013) - Manual (Page 44)

44 | Replacing the mSATA Card
Replacing the mSATA Card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Insert the mSATA card connector at a 45-degree angle into the system- board
connector.
2 Press the other end of the mSATA card down into the slot on the system board and
replace the screw that secures the mSATA card to the system-board connector.
Postrequisites
1 Replace the battery pack. See "Replacing the Battery Pack" on page 17.
2 Replace the base cover. See "Replacing the Base Cover" on page 15.au
3 Follow the instructions in "After Working Inside Your Computer" on page 13.
Book.book Page 44 Friday, June 28, 2013 11:10 AM