Dell 5310n Mono Laser Printer - Manual (Page 71)

Internal System Error Reload
Bookmarks l Reload the Bookmarks.
l Press the Select button to clear the message and continue printing.
Internal System Error, Reload Security
Certificates l Reload the Security Certificates.
l Press the Select button to clear the message and continue printing.
Invalid Network Code Download valid code to the internal print server.
NOTE: You can download network code while this message is displayed.
Invalid Engine Code Download valid engine code to the printer.
NOTE: You can download engine code while this message is displayed.
Invalid PIN Enter the correct PIN.
Load manual feeder with
<Custom Type> l Load the specified paper in the manual feed tray or multipurpose feeder.
l Press the Select button to ignore the manual feed request and print on paper already installed in one of
the input sources.
If the printer finds a tray that has paper of the correct type and size, it feeds paper from that tray. If the
printer cannot find a tray with the correct paper type and size, it prints on whatever paper is installed in the
default input source.
l Cancel the current job.
Load manual feeder with
<Custom String>
Load manual feeder with <size>
Load manual feeder with
<size> <type>
Load <src> with <Custom Type Name> l Load the input source with the correct type and size media.
l Cancel the current job.
Load <src> with <Custom String>
Load <src> <size>
Load <src> <type> <size>
Maintenance Replace the maintenance items and, if necessary, reset the printer maintenance counter.
Menus are Disabled The printer menus are disabled. You cannot change the printer settings from the operator panel.
NOTE: You can still cancel a job, print a confidential job, or print a held job.
Contact your system support person.
Network A network interface is the active communication link.
Network <x>
Network <x>, <y> A network interface is the active communication link, where <x> represents the active communication link, and <y>
represents the channel.
No held jobs Wait for the message to clear.
No jobs found NOTE: The four-digit personal identification number (PIN) you entered is not associated with any confidential print
job.
l Select Try again to enter another PIN.
l Select Cancel to exit the Enter PIN screen.
No jobs to cancel Wait for the message to clear.
Overflow Bin Full Remove the stack of paper from the bin to clear the message.
Parallel A parallel interface is the active communication link.
Parallel <x>
Power Saver l Send a job to print.
l Press the Select button to warm the printer to normal operating temperature and display the Ready
message.
Printer locked, enter PIN to unlock The operator panel has been locked.
Enter the correct PIN number.
Printing Wait for the message to clear.
Printing Alignment Page Wait for the message to clear.
Programming System Code Wait for the message to clear and the printer to reset.
NOTE: Do not turn the printer off while this message is displayed.
Programming Flash Wait for the message to clear.
NOTE: Do not turn the printer off while this message is displayed.
Ready Send a job to print.
Reattach bin <x> l Turn the printer off and back on.
¡ If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and remove the
specified bin, then reattach the bin to the printer, reconnect the power cord to a properly grounded
outlet, and then restart the printer.
¡ If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and remove the
specified device, and call for service.
l Press the Select button to clear the message and print without using the specified bin.