Dell 5310n Mono Laser Printer - Manual (Page 72)

Reattach bins <x> - <y> l Turn the printer off and back on.
¡ If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and remove the
specified bins, then reattach the bin to the printer, r, and then restart the printer.
¡ If the error recurs, turn the printer off, unplug the power cord from the wall outlet, and remove the
specified bin, and call for service.
l Press the Select button to clear the message and print without using the specified bins.
Reattach envelope feeder l Turn the printer off and back on.
¡ If the error recurs, turn the printer off, remove the envelope feeder, then reattach the envelope feeder
to the printer.
¡ If the error recurs, turn the printer off, remove the envelope feeder, and call for service.
l Press the Select button to clear the message and print without using the envelope feeder.
Remote Management Active
DO NOT POWER OFF The printer settings are being configured, and the printer was taken offline to ensure it is not currently printing and
processing jobs.
Wait for the message to clear.
Remove paper from bin <x> Remove the stack of paper from the specified bin(s).
Remove paper from all bins Remove the paper from all output bins.
Remove paper from
<linked set bin name> The printer automatically senses media removal and resumes printing.
If removing the media does not clear the message, Press the Select button .
Remove paper from standard output
bin Remove the paper from the standard bin.
Resetting Active Bin Wait for the message to clear.
Resetting the Printer Wait for the message to clear.
Restoring Factory Defaults Wait for the message to clear.
NOTE: When factory default settings are restored:
l All downloaded resources (fonts, macros, symbol sets) in the printer memory are deleted.
l All menu settings return to the factory default setting except:
¡ The Display Language setting in the "Setup" Menu.
¡ All settings in the "Parallel" Menu, "Network" Menu, "Infrared" Menu, "LocalTalk" Menu, and "USB"
Menu.
Restoring held job(s) x/y l Wait for the message to clear.
l Select Quit restoring to delete unrestored Print and Hold jobs.
NOTE: x represents the number of the job being restored, and y represents the total number of jobs to be
restored.
Some held jobs were lost
l Press the Select button to clear the message and continue printing.
The printer frees memory by deleting the oldest held job and continues deleting held jobs until there is
enough printer memory to process the job.
l Cancel the current job.
Standard Bin Full Remove the stack of paper from the bin to clear the message.
Submitting selection Wait for the message to clear.
Toner Low l Replace the toner cartridge.
l Press Select to clear the message and continue printing.
Tray <x> Empty Load paper in the tray to clear the message.
Tray <x> Low Add paper to the tray to clear the message.
Tray <x> Missing Insert the tray into the printer.
USB The printer is processing data through the specified USB port.
USB <x>
View supplies Displays the current level of all printer supplies.
Waiting The printer has received a page of data to print, but is waiting for an End of Job command, a Form Feed command,
or additional data.
l Press the Select button to print the contents of the buffer.
l Cancel the current job.