Predefined performance graphs, Table 10, Table 11 – Dell POWEREDGE M1000E User Manual
Page 133: Draft: brocade confidential
Web Tools Administrator’s Guide
105
53-1001772-01
Performance Monitor overview
8
DRAFT: BROCADE CONFIDENTIAL
Predefined performance graphs
Web Tools predefines basic graph types to simplify performance monitoring. A wide range of
end-to-end fabric, LUN, device, and port metrics graphs are included.
lists the basic monitoring graphs available.
lists the advanced monitoring
graphs.
The advanced monitoring graphs give more detailed performance information to help you manage
your fabric. You can access the basic monitoring graphs on all switches; advanced monitoring
graphs are available only on switches that have a Brocade Advanced Performance Monitoring
license activated.
TABLE 10
Basic performance graphs
Graph type
Display description
Port Throughput
The performance of a port, in bytes per second, for frames received and
transmitted.
Switch Aggregate Throughput
The aggregate performance of all ports on a switch.
Blade Aggregate Throughput
The aggregate performance of all ports on a port card. This graph is
available only for the Brocade 48000 and Brocade DCX and DCX-4S
enterprise-class platforms.
Switch Throughput Utilization
The port throughput, in Gbps at the time the sample is taken. For the
Brocade 48000 and Brocade DCX and DCX-4S enterprise-class platforms,
this graph displays the throughput for each slot. You can customize this
graph to display information for particular ports.
Port Error
CRC errors for a given port.
Switch Percent Utilization
The percentage utilization for each port in a switch. For the Brocade 48000
and Brocade DCX, this graph displays the percent utilization for each slot.
You can customize this graph to display information for particular ports.
Port Snapshot Error
The CRC error count between sampling periods for all the ports on a switch.
For the Brocade 48000 and Brocade DCX and DCX-4S enterprise-class
platforms, this graph displays the CRC error rate for each slot. You can
customize this graph to display information for particular ports.
TABLE 11
Advanced performance monitoring graphs
Graph type
Display description
SID/DID Performance
The traffic between the SID-DID pair on the switch being managed. The
member selection list in the LHS displays the port in the current switch only.
The All Devices tab lists all the devices in the fabric. SID/DID Performance
can be used to select the source and destination. For more information,
refer to
“Creating SID-DID Performance graphs”
SCSI vs. IP Traffic
The percentage of SCSI versus IP frame traffic on each individual port. For
more information, refer to
“Creating the SCSI vs. IP Traffic graph”
SCSI Commands by port and LUN
(R, W, R/W)
The total number of read/write commands on a given port to a specific LUN.
For more information, refer to