Dell POWEREDGE M1000E - Manual (Page 180)

152 Web Tools Administrator’s Guide
53-1001772-01
FC-FC routing management
11
DRAFT: BROCADE CONFIDENTIAL
The FC Routing module displays (as shown in Figure 46 ). If FC-FC Routing is disabled, a
message to that effect displays on all the tabs in the module.
FIGURE 46 FC Routing module in Disabled mode with General tab selected
Viewing and managing LSAN fabrics
The LSAN Fabric tab ( Figure 47 on page 153) displays all the LSAN fabrics visible to your switch, in
both a tabular and tree form. (If FC-FC Routing is disabled, the table and tree nodes in this tab are
empty and the tree displays only the backbone switch.)
For more detailed information about a specific LSAN fabric, click a fabric name in the table and
then click View Details in the task bar. You can also click the fabric name in the tree on the left side
of the window.
When there is more than one router present in the backbone fabric with different backbone Fabric
IDs, the routers with the conflicting IDs are shown in a separate table on the LSAN Fabric tab.