Dell POWEREDGE M1000E - Manual (Page 157)

Web Tools Administrator’s Guide 129
53-1001772-01
Zoning management
9
DRAFT: BROCADE CONFIDENTIAL
4. Highlight an element in the Member Selection List that you want to include in your zone, or
highlight an element in the Zone Members list that you want to delete.
5. Click Add Member to add a zone member, or click Remove Member to remove a zone member.
The zone is modified in the Zone Admin buffer.
6. Select Zoning Actions > Save Config to save the configuration changes.
Renaming zones
For information on enabling the configuration, refer to “Enabling zone configurations” on page 134.
Use the following procedure to change the name of a zone.
1. Open the Zone Administration window as described in “Opening the Zone Administration
window” on page 121.
2. Click the Zone tab.
3. Select the zone you want to rename from the Name list.
4. Click Rename.
5. In the Rename a Zone dialog box, enter a new zone name and click OK. The zone is renamed in
the Zone Admin buffer.
6. Select Zoning Actions > Save Config to save the configuration changes.
Cloning zones
To perform clone operations for zoning, the EGM license must be installed on the switch;
otherwise, access to this feature is denied and an error message displays.
The EGM license is required only for 8 Gbps platforms, such as the following:
• Brocade DCX and DCX-4S enterprise-class platforms
• Encryption Switch
• 300, 5300, and 5100 switches
For non-8 Gbps platforms, all functionalities are available without EGM license.
Use the following procedure to clone a zone configuration.
1. Open the Zone Administration window as described in “Opening the Zone Administration
window” on page 121.
2. Click the Zone tab.
3. Select the zone you want to clone from the Name list.
4. Click Clone
5. In the Clone an Existing Zone dialog box, enter a name for the copied zone.
6. Click OK. The selected zone is copied from the Zone Admin buffer.
7. Select Zoning Actions > Save Config to save the configuration changes. Because no changes
were made to the effective configuration, you do not need to enable the configuration.