Cognitive Solutions C SERIES User Manual
Page 37
Copyright © 2006, Cognitive - 1.800.525.2785
30
1 0 5 - 1 6 9 - 0 3
When the ribbon feels secure, gently push and rotate the green supply spindle
clockwise, while holding the supply clutch hug, until the ribbon seats properly.
Figure 2-30. Supply spindle Rotation to Secure Supply Roll In Place
Once the ribbon supply roll is loaded, gently lower the printhead mechanism down with
one hand while holding the user interface cover with the other hand. DO NOT LATCH
the printhead mechanism. Refer to Figure 2-31.
Figure 2-31. Separating and Lowering the Printhead Mechanism from the User Interface Without
Latching the Mechanism
NOTE: IF THE PRINTHEAD MECHANISM LATCHES, A CLICKING NOISE WILL SOUND. IF THE
PRINTHEAD MECHANISM IS LATCHED BY MISTAKE, PUSH UP THE BLACK PRINTHEAD
LATCHES TO RELEASE THE PRINTHEAD MECHANISM AS SHOWN IN
FIGURE 2-24
.