Cognitive Solutions C SERIES User Manual
Page 57
Advertising
Copyright © 2006, Cognitive - 1.800.525.2785
50
1 0 5 - 1 6 9 - 0 3
If you have a 4” wide printer, then the gap sensor will be effectively adjustable for the left half of
the media path as shown in the pictures below.
4” Printer shown with extreme settings for gap mode. Note that the sensor should only be adjusted to near
center in its right-most setting.
Black Mark Mode
Both the 2” and 4” printers are adjustable the full width of the media path. Please see the C-
Series technical specification for the exact width of adjustment.
Advertising