Cognitive Solutions C SERIES - Manual (Page 39)

Copyright © 2006, Cognitive - 1.800.525.2785 32
1 0 5 - 1 6 9 - 0 3
Place the ribbon take up roll into position as shown in Figure 2-34. Once the ribbon feels
secure, gently push and rotate the green take up spindle clockwise to make sure the
ribbon take up core is engaged with the notches on the printer.
Figure 2-34. Seating the Ribbon Take Up Core Into the Take Up Spindle Notches
Once the ribbon take up core has been installed, turn the take up spindle clockwise to
wind the ribbon leader onto the take up core. Rotate the green take up spindle clockwise
until the black ribbon begins winding on the take up core as shown in Figure 2-35.
Figure 2-35. Winding the Ribbon Onto the Take Up Core