Dell 948 All In One Printer - Manual (Page 44)

Understanding the Operator Panel Menus
file:///T|/htdocs/systems/prn948/en/en/d0e648.html[10/10/2012 11:05:28 AM]
Device Setup Options
You can reconfigure your operator panel settings by selecting Device Setup from the Setup menu.
*Factory default setting/Current setting selected by user
Country
Date/Time
Host Fax Settings
Button Beep
Power Save
Clear Settings Timeout
For more information, see Device Setup Options .
Defaults Change the default settings from the factory to settings you specify.
Photo Print Size
Set Defaults
For more information, see Defaults Options .
Network Setup Specify your network settings.
Print Setup Page
Wireless Setup
TCP/IP Menu
Network Time
For more information, see Network Setup Options .
Device Setup Menu
From this menu: You can:
*Factory default setting/Current setting selected by user
Language Specify your language options.
Country Specify your country options.
Date/Time Enter your current date and time.
Host Fax Settings Specify if you want to allow the printer fax settings to be reconfigured from the Printer Setup Utility
software.
Allow*
Block
Button Beep Specify if you want to hear a beep when you press buttons on the operator panel.
On*
Off
Power Save Specify how much time you want to elapse before the printer switches to Power Save mode.
Never
After 60 Min*
After 30 Min
After 10 Min
Now
Clear Settings
Timeout
Select how much time you want to elapse before the settings list is reset to the defaults.
2 Minutes*
Never