Dell 948 All In One Printer - Manual (Page 45)

Understanding the Operator Panel Menus
file:///T|/htdocs/systems/prn948/en/en/d0e648.html[10/10/2012 11:05:28 AM]
Defaults Options
You can specify your operator panel default settings by selecting Defaults from the Setup menu.
Network Setup Options
You can configure your network setup options by selecting Network Setup from the Setup menu.
Defaults Menu
From this menu: You can:
Photo Print Size Specify the size of your photo.
Set Defaults Specify which settings to use for your printer.
Use Current
Use Factory
Network Setup Menu
From this menu: You can:
Print Setup Page Print a list of wireless network settings.
Wireless Setup View your wireless setup options.
Network Name
Wireless Signal Quality
TCP/IP Menu Configure TCP/IP setup options.
Enable DHCP
If DHCP is disabled, these items appear on the display:
Set IP Address
Set IP Netmask
Set IP Gateway
If DHCP is enabled, these items appear on the display:
View IP Address
View IP Netmask
View IP Gateway
Network Time Allow your printer to update its internal clock according to the time server of your
network.
Enable
Disable
Reset Network Adapter to Factory
Defaults
Clear all wireless network settings.
Wireless Setup Menu
From this menu: You can:
Network Name View the current SSID being used.
NOTE: You cannot change the value of Network Name.
Wireless Signal Quality View the current wireless signal strength.
TCP/IP Menu
From this
menu:
You can: