Dell 948 All In One Printer - Manual (Page 46)

Understanding the Operator Panel Menus
file:///T|/htdocs/systems/prn948/en/en/d0e648.html[10/10/2012 11:05:28 AM]
Maintenance Mode
To view or change the Maintenance Mode menu settings:
1. From the main menu, use the left and right Arrow buttons to scroll to MAINTENANCE.
2. Press the Select button .
3. Use the left and right Arrow buttons until the heading you want appears on the display, and then press the
Select button .
*Factory default setting/Current setting selected by user
Enable DHCP Enable DHCP on your printer.
Yes*
No
NOTE: You cannot change or set an IP Address, IP Netmask, and IP Gateway if DHCP is enabled.
Set IP Address Use the keypad to enter an IP address. Press the Select button to save your settings.
NOTE: The IP address cannot be changed if DHCP is enabled. View IP Address appears on the display
instead.
Set IP Netmask Use the keypad to enter an IP address. Press the Select button to save the settings.
NOTE: The IP netmask cannot be changed if DHCP is enabled. View IP Netmask appears on the display
instead.
Set IP Gateway Use the keypad to enter an IP address. Press the Select button to save the settings.
NOTE: The IP gateway cannot be changed if DHCP is enabled. View IP Gateway appears on the display
instead.
Main Menu Mode Main Menu
Maintenance Ink Levels
Clean Cartridges
Align Cartridges
Print Test Page
From this
menu:
You can:
Ink Levels Press the Select button to view the level of ink in both cartridges.
Clean
Cartridges
Press the Select button to clean the ink cartridges. A cleaning page prints. You may discard the page
when printing is complete.
Align
Cartridges
Press the Select button to align the ink cartridges. An alignment page prints. You may discard the page
when printing is complete.
Print Test
Page
Press the Select button to print a test page. You may discard the page when printing is complete.