Dell 948 All In One Printer - Manual (Page 60)

Maintenance
file:///T|/htdocs/systems/prn948/en/en/d0e10317.html[10/10/2012 11:05:35 AM]
Restoring Factory Default Settings
Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original printer settings, often
referred to as the factory default settings.
1. Make sure the printer is on.
2. From the operator panel, use the left and right Arrow buttons to scroll to SETUP, and then press the Select
button .
3. Use the left and right Arrow buttons to scroll to Defaults, and then press the Select button .
4. Use the left and right Arrow buttons to scroll to Set Defaults, and then press the Select button .
5. Use the left and right Arrow buttons to scroll to Use Factory, and then press the Select button .
Settings are reset to factory defaults.
Restoring Language to Factory Default
You can restore the language on your display to factory default without using the printer menus.
NOTE: Using this key sequence will also restore all other selected settings to factory default.
1. Turn your printer off.
2. Press and hold the Back button and the Start button while pressing the Power button .
3. Continue pressing these buttons until Lang cleared appears on the display.
4. Use the left and right Arrow buttons to select your language, country, time, date, fax number, and fax name.
Press the Select button to save each selection.