Installing the system board – Dell PowerVault NX300 User Manual
Page 142
Advertising
142
Installing System Components
Figure 3-30.
Removing and Installing the System Board
Installing the System Board
1 Unpack the new system board.
2 Remove the labels from the processor shield and affix them to the system
identification panel on the front of the system. See Figure 1-1.
3 Transfer the processors to the new system board. See "Removing a
Processor" on page 122 and "Installing a Processor" on page 126.
4 Remove the memory modules and transfer them to the same locations on
the new board. See "Removing Memory Modules" on page 121 and
"Installing Memory Modules" on page 119.
1
screws (9)
2
system board assembly
1
2
book.book Page 142 Thursday, August 13, 2009 7:27 AM
Advertising