Dell PowerVault NX300 - Manual (Page 22)

22
About Your System
hard drive failure. Ensure that the diskette drive and
hard drive are properly connected.
See "Hard Drives" on page 84 for
information on the drives
installed in your system.
Possible USB failure. See "Troubleshooting a USB
Device" on page 148.
No memory modules
detected. See "Troubleshooting System
Memory" on page 154.
System board failure. See "Getting Help" on page 177.
Memory configuration
error. See "Troubleshooting System
Memory" on page 154.
Possible system board
resource and/or system
board hardware failure. See "Getting Help" on page 177.
Possible system resource
configuration error. See "Contacting Dell" on
page 177.
Other failure. Ensure that the diskette drive,
optical drive, and hard drives are
properly connected. See
"Troubleshooting Your System" on
page 147 for the appropriate drive
installed in your system. If the
problem persists, see "Getting
Help" on page 177.
Table 1-1. Diagnostic Indicator Codes (Optional) (continued)
Code Causes Corrective Action
book.book Page 22 Thursday, August 13, 2009 7:27 AM