Cisco 10000 - Manual (Page 21)

Contents
xxi
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Configuring IPv6 Traffic Filtering 21-5
Creating and Configuring the IPv6 ACL 21-5
Applying the IPv6 ACL to an Interface 21-6
Verifying IPv6 ACLs 21-7
Create and Apply IPv6 ACL: Examples 21-8
C H A P T E R
22 Configuring Template ACLs 22-1
Feature History for Template ACLs 22-2
Configuration Tasks for Template ACLs 22-3
Configuring the Maximum Size of Template ACLs (Optional) 22-3
Configuring ACLs Using RADIUS Attribute 242 22-3
Monitoring and Maintaining the Template ACL Configuration 22-5
Configuration Examples for Template ACLs 22-5
access-list template Command 22-5
access-list template Command History 22-6
access-list template Command Modes 22-6
Usage Guidelines for the access-list template Command 22-6
Examples 22-6
show access-list template Command 22-6
show access-list template Command Modes 22-7
show access-list template Command History 22-7
Examples 22-7
C H A P T E R
23 Protecting the Router from DoS Attacks 23-1
IP Options Selective Drop 23-1
Feature History for IP Options Selective Drop 23-2
Restrictions for IP Options Selective Drop 23-2
How to Configure IP Options Selective Drop 23-2
Dropping Packets with IP Options 23-2
Verifying IP Options Packets 23-3
Configuration Examples for IP Options Selective Drop 23-3
Dropping IP Options Packets: Example 23-3
Verifying IP Options Handling: Example 23-4
Related Documentation 23-4
C H A P T E R
24 IP Tunneling 24-1
GRE Tunnel IP Source and Destination VRF Membership 24-1
Tunnel VRF 24-1