Cisco 10000 - Manual (Page 507)

A-3
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Appendix A RADIUS Attributes
RADIUS IETF Attributes
50 Acct-Multi-Session-Id Multilink is not supported.
51 Acct-Link-Count Multilink is not supported.
52 Acct-Input-Gigawords Supported and tested
53 Acct-Output-Gigawords Supported and tested
60 CHAP-Challenge Supported in Cisco IOS but not tested
on the Cisco 10000 series router.
61 NAS-Port-Type Supported and tested
62 Port-Limit Not Applicable
63 Login-LAT-Port Not Applicable
64 Tunnel-Type Supported on the
Cisco 10000 series router but the
router only supports L2TP tunnels.
65 Tunnel-Medium-Type Supported on the
Cisco 10000 series router but IP is the
only medium the router currently
supports.
66 Tunnel-Client-Endpoint Supported and tested in accounting.
67 Tunnel-Server-Endpoint Supported and tested in accounting.
68 Acct-Tunnel-Connection Supported and tested in Cisco IOS
Release 12.2(15)BX.
69 Tunnel-Password Supported and tested in Cisco IOS
Release 12.2(15)BX.
70 ARAP-Password Not Supported
71 ARAP-Features Not Supported
72 ARAP-Zone-Access Not Supported
73 ARAP-Security Not Supported
74 ARAP-Security-Data Not Supported
75 Password-Retry Not Supported
76 Prompt Typically not used in DSL environment
77 Connect-Info Supported and tested in Cisco IOS
Release 12.2(15)BX.
78 Configuration-Token Not Supported
79 EAP-Message Not Supported
81 Tunnel-Private-Group-ID Not Supported
82 Tunnel-Assignment-ID Supported and tested in Cisco IOS
Release 12.2(15)BX.
83 Tunnel-Preference Supported and tested in Cisco IOS
Release 12.2(15)BX.
84 ARAP-Challenge-Response Not Supported
Table A-1 RADIUS IETF Attributes (continued)
Number IETF Attribute Status