Cisco 10000 - Manual (Page 147)

4-15
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 4 Configuring Multiprotocol Label Switching
Session Limit Per VRF
!
router isis
net 49.0000.0000.0002.00
redistribute connected metric 50
passive-interface Loopback0
!
router bgp 100
bgp log-neighbor-changes
neighbor 200.10.10.1 remote-as 100
neighbor 200.10.10.1 update-source Loopback0
neighbor 8008::72a remote-as 200
!
address-family ipv4
neighbor 200.10.10.1 activate
no auto-summary
no synchronization
exit-address-family
!
address-family ipv4 multicast
no auto-summary
exit-address-family
!
address-family vpnv6
neighbor 200.10.10.1 activate
neighbor 200.10.10.1 send-community extended
exit-address-family
!
address-family ipv6 vrf red
no synchronization
redistribute connected
exit-address-family
!
address-family ipv6 vrf blue
neighbor 8008::72a activate
no synchronization
redistribute connected
exit-address-family
!
ip classless
no ip http server
!
end
Monitoring and Maintaining IPv6 VPN over MPLS
For information on monitoring and maintaining IPv6 VPN over MPLS, see the Verifying and
Troubleshooting IPv6 VPN section in the Implementing IPv6 VPN over MPLS (6VPE) chapter of the
Cisco IOS IPv6 Configuration Guide, Release 12.4T guide at:
http://www.cisco.com/en/US/docs/ios/12_2t/ipv6/SA_vpnv6_ps6441_TSD_Products_Configuration_G
uide_Chapter.html#wp1078529
Session Limit Per VRF
The session limit Per VRF feature enables you to limit the number of sessions that can be established
for VPDN groups associated with a specific VPDN template. Previously, you associated all VPDN
groups configured on the router with a single template. By using the session limit Per VRF feature, you
can create, define, and name multiple VPDN templates, including a default VPDN template. You can