Cisco 10000 - Manual (Page 239)

7-5
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 7 Configuring IP Unnumbered on IEEE 802.1Q VLANs
Monitoring and Maintaining IP Unnumbered Ethernet VLAN Subinterfaces
The following example enables IP unnumbered on a range of VLAN subinterfaces:
interface range fastethernet0/0.11 - fastethernet0/0.60
encapsulation dot1q 101
ip unnumbered ethernet 0
Monitoring and Maintaining IP Unnumbered Ethernet VLAN
Subinterfaces
To monitor and maintain IP unnumbered Ethernet VLAN subinterfaces, enter any of the following
commands in privileged EXEC mode:
Command Purpose
Router# show interfaces type number
slot/module/port.subinterface
Displays information about the interface you specify.
Router# show running-config Displays the contents of the currently running configuration file.
Router# show running-config [interface type
number]
Displays the configuration for a specific interface.
Router# show vlans Displays information about VLAN subinterfaces.