Vc class – Cisco 10000 User Manual
Page 243
8-3
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 8 Configuring ATM Permanent Virtual Circuit Autoprovisioning
ATM PVC Autoprovisioning
VC Class
A VC class is a set of preconfigured VC parameters that you configure and apply to a particular VC or
ATM interface. The VC parameters that you can configure for a VC class include the following:
•
Attach ATM VC class to an interface (class-int command)
•
Constant bit rate (cbr command)
•
Encapsulation type (encapsulation aal5 command)
•
Idle-timeout (idle-timeout command)
•
Integrated Local Management Interface (ILMI) management (ilmi manage command)
•
Inverse ARP broadcasts (protocol command)
•
Inverse ARP time period (inarp command)
•
OAM management on a PVC (oam-pvc command)
•
OAM management parameters for re-establishing and removing a PVC connection (oam retry
command)
•
PVC autoprovisioning (create on-demand command)
•
Queue depth (queue-depth command)
•
Static map for an ATM PVC or VC (protocol command)
•
Unspecified bit rate (ubr command)
•
Variable Bit Rate-Non Real Time quality of service (vbr-nrt command)
•
Weight (weight command)
For more information, see the Configuring ATM chapter in the Cisco IOS Wide-Area Networking
Configuration Guide.