Cisco 10000 - Manual (Page 301)

11-11
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 11 Configuring Local AAA Server, User Database—Domain to VRF
!
interface Loopback2
ip vrf forwarding vrf2
ip address 101.1.1.1 255.255.255.255
!
interface FastEthernet0/0/0
shutdown
!
interface ATM1/0/0
no ip address
no atm pxf queuing
no atm ilmi-keepalive
!
interface ATM1/0/0.1 multipoint
pvc 1/32
encapsulation aal5autoppp Virtual-Template1 group cisco1.com
no create on-demand
!
!
interface ATM1/0/0.2 multipoint
pvc 1/33
encapsulation aal5autoppp Virtual-Template2 group cisco2.com
!
!
interface FastEthernet6/0/0
ip vrf forwarding vrf1
ip address 192.168.2.201 255.255.255.0
duplex auto
!
interface FastEthernet6/0/1
ip vrf forwarding vrf2
ip address 192.168.2.202 255.255.255.0
duplex auto
!
interface Virtual-Template1
no ip address
no logging event link-status
no snmp trap link-status
ppp mtu adaptive
ppp authentication chap callin
!
ip local pool pppoe2 12.1.1.1 12.1.250.1
!
ip radius source-interface FastEthernet6/0/0.1 vrf vrf1
ip radius source-interface FastEthernet6/0/0.2 vrf vrf2
!
radius-server attribute nas-port format d
radius-server domain-stripping
Example—VRF with DBS
Applying the PCR and SCR to this PPP:
aaa attribute list cisco1.com
attribute type addr-pool "pppoe" protocol ip
attribute type ip-unnumbered "loopback1" service ppp protocol ip
attribute type vrf-id "vrf1" service ppp protocol ip
attribute type peak-cell-rate 2048 protocol atm
attribute type sustainable-cell-rate 1024 protocol atm