Cisco 10000 - Manual (Page 505)

A-1
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
A P P E N D I X
A
RADIUS Attributes
This appendix lists the RADIUS attributes that the Cisco 10000 series router supports in Cisco IOS
Release 12.2(4)BZ1 and later releases. The following conventions are used in the tables that follow:
• Supported and tested—The attribute has been tested and the Cisco 10000 series router supports it.
• Not Supported—The Cisco 10000 series router does not support the attribute.
• Not Applicable—The attribute does not apply to the Cisco 10000 series router.
Note For more information, see the “RADIUS Attributes” appendix in the Cisco IOS Security Configuration
Guide, Release 12.2.
RADIUS IETF Attributes
Table A-1 RADIUS IETF Attributes
Number IETF Attribute Status
1 User-Name Supported and tested
2 User-Password Supported and tested
3 CHAP-Password Supported and tested
4 NAS-IP Address Supported and tested
5 NAS-Port Supported and tested
6 Service-Type Supported and tested
7 Framed-Protocol Supported and tested
8 Framed-IP-Address Supported and tested
9 Framed-IP-Netmask Supported and tested
10 Framed-Routing Router receives this attribute and
properly handles a value of 0:None.
Unclear if the system properly handles
a value of 3:send and listen.
11 Filter-ID Supported and tested
12 Framed-MTU Supported and tested