Removing the input/output board shield – Dell OptiPlex 9010 All In One (Mid 2012) User Manual
Page 27
Advertising
b) VESA mount bracket
c) back cover
d) VESA stand
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Input/Output Board Shield
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a) VESA stand
b) back cover
c) VESA mount bracket
d) system-board shield
e) power-supply fan
3.
Lift the input/output panel away from the computer.
4.
Remove the screws that secure the power connector to the input/output board shield.
27
Advertising