Dell OptiPlex 9010 All In One (Mid 2012) - Manual (Page 58)

Option Description
Password Change Allows you to determine whether changes to the system and hard disk passwords are
permitted when an administrator password is set.
• Allow Non-Admin Password Changes (selected by default)
TPM Security This option lets you control whether the Trusted Platform Module (TPM) in the system
is enabled and visible to the operating system.
• TPM Security (selected by default)
• Clear
• TPM ACPI Support
• TPM PPI Deprovision Override
• TPM PPI Provision Override
NOTE: Activation, deactivation, and clear options are not affected if you load the
setup program's default values. Changes to this option take effect immediately.
Computrace This field lets you activate or disable the BIOS module interface of the optional
Computrace Service from Absolute Software.
• Deactivate (selected by default)
• Disable
• Activate
Chassis Intrusion This field controls the chassis intrusion feature.
• Disable
• Enable (selected by default)
• On-Silent
CPU XD Support Allows you to enable or disable the execute disable mode of the processor.
• Enable CPU XD Support (selected by default)
OROM Keyboard Access Allows you to determine if you access the Option Read Only Memory (OROM)
configuration screens via hotkeys during boot. These settings prevent access to the
Intel RAID (CTRL+I) or Intel Management Engine BIOS Extension (CTRL+P/F12).
• Enable (selected by default) — User may enter OROM configuration screens
via the hotkey.
• One-Time Enable — User can enter the OROM configuration screens via the
hotkeys during the next boot. After the boot, the setting will revert to disabled.
• Disable — User can not enter the OROM configuration screens via the
hotkey.
Admin Setup Lockout Allows you to enable or disable the option to enter setup when an admin password is
set.
• Enable Admin Setup Lockout (selected by default)
58