Dell OptiPlex 9010 All In One (Mid 2012) - Manual (Page 56)

Option Description
• Disabled — The internal LAN is off and not visible top the operating system.
• Enabled — The internal LAN is enabled.
• Enabled w/PXE (selected by default) — The internal LAN is enabled (with
PXE boot).
• Enabled w/ImageServer — The internal LAN is enabled (with ImageServer
boot).
SATA Operation This option configures the operating mode of the integrated SATA hard drive
controller.
• Disabled — SATA controllers are hidden.
• ATA — SATA is configured for ATA mode.
• AHCI (selected by default) — SATA is configured for AHCI.
Drives This option lets you enable or disable various drives on board. By default the options
are enabled.
• SATA-0
• SATA-1
SMART Reporting This field controls if the hard drive errors for the integrated drives are reported
during system startup. This technology is part of the SMART (Self Monitoring
Analysis and Reporting Technology) specification.
• Enable SMART Reporting - This option is disabled by default.
USB Configuration This field configures the integrated USB controller. If Boot Support is enabled, the
system is allowed to boot any type of USB mass storage devices (HDD, memory key,
floppy).
If USB port is enabled, device attached to this port is enabled and available for
operation system.
If USB port is disabled, the operation system cannot see any device attached to this
port.
• Enable Boot Support
• Enable Front/Rear Dual USB 3.0 Ports
• Enable Rear Quad USB 2.0 Ports (2x2.0)
Audio The field allows you to enable the audio.
Enable Audio
Miscellaneous Devices Allows you to enable or disable various on-board devices.
• Enable/Disable Microphone
• Enable/Disable Camera
• Enable/Disable Media Card
56