Clarion UNGO MS3001 - Manual (Page 12)

Page 10 - MS3001 / MS3200 Installation Manual
Accessing the Jumpers
Using a flathead screwdriver, carefully press in on the
access tabs on the sides of the case until the hooks
release.
Take care not to push the tabs in too far or they may
break.
Once you have made your selections, close the case by
aligning the top and button halves of the case, making
sure that the tabs are over their mounting holes.
Setting the Jumpers
install_MS3001.qxd 8/11/99 4:15 PM Page 10