Cisco WIRELESS-G WBP54G User Manual

Page 30

Advertising
background image

25

Appendix C: Upgrading Firmware

Wireless-G Broadband Router

5. On the Choose Destination Location screen, click the Next button.

6. When the utility has been installed, a pop-up screen will appear. Click the OK button.

7. A new window will appear on your desktop. You will use it later in step 9.

Disconnect the Bridge’s combination Ethernet network and power cable from the phone adapter or IP phone.

If your PC is in a different room, disconnect the power adapter from the electrical outlet. Move the power
adapter and Bridge to the location of your PC.

8. Connect the Ethernet network cable of the Bridge to an Ethernet network (LAN) port of the PC.

If necessary, plug the power adapter into an electrical outlet.

9. In the new window on your desktop, double-click Upgrade Utility.

Figure C-4: Choose Destination

Location

Figure C-5: Setup

is Complete

Figure C-6: Start Upgrade Utility Program

Advertising