Chamberlain SL 1000-B3 - Manual (Page 22)

Rev E Doc 01-20201 19 of 33
Figure 16. Bi-Part Latch, Uni-Direction Gate System
(Swing gate, if used, opens in).
* WARNING
If Radio is used, gate system becomes bi-directional, compromising safety and security.
Figure 17. Bi-Part Latch, Uni-Directional Gate System
(Swing gate opens out).
* WARNING
If Radio is used, gate system becomes bi-directional, compromising safety and security.
Gate
Operator
Master
Gate
Operator
Slave
Exit Loop
Swing gate open
direction and its
maximum arc.
Inside Interrupt Loop
Slide, Barrier or Swing Gate Fence Fence
Additional
Master Wiring
(if needed):
Fire
Manual Inputs
Interrupt Bar
Photo-Sensor
MagLock
Warning Relay
Tel. Line
1398F12
Slide, Barrier or Swing Gate
Shadow Loop
(swing gates only)
Master/Slave Cable
Can use Radio* or Cycle if
Exit Loop is not used.
Gate
Operator
Master
Gate
Operator
Slave
Exit Loop
Swing gate open
direction and its
maximum arc.
Inside Interrupt Loop
Outside Interrupt Loop
Swing Gate
Fence Fence
Additional
Master Wiring
(if needed):
Fire
Manual Inputs
Interrupt Bar
Photo-Sensors
MagLock
Warning Relay
Tel. Line
1398F13
Shadow Loop
Swing Gate
Can use Radio* or Cycle if
Exit Loop is not used.
Master/Slave Cable