RadioPopper PX - Manual (Page 13)

Transmitter Mounting on Other Hardware
For mounting the PX Transmitter on other hardware such as the Canon ST-E2 and Nikon SU-800 IR Commanders,
the mounting is essentially the same. Mount the PX Transmitter to the very top of the Master device, about
centered with the magnetic pickup sensor facing forward and the antenna pointed upward.
For additional images of product mounting, please see the Support section of our website.
Canon ST-E2: We suggest mounting Velcro to the front side of the battery cover.
Nikon SU-800: Mount directly on the top edge, which is a bit rounded but with proper placement and pressure
on the Velcro pads, a good anchor should be achievable. You may also place the PX Transmitter on the front of
your SU-800 with the magnetic pickup sensor pointed upward. Velcro the unit to the SU-800 battery door.
Nikon “Pop-Up Flash”: Using the PX Transmitter Nikon Hot Shoe Pop-Up Flash Adapter (Sold Separately) sim-
ply slide it into the hot shoe. Next, clip your PX Transmitter into the top of the mount with the magnetic pickup
sensor facing forward. Ensure that your Commander mode is activated on your camera.
Installation
Page 13
Fig 2.1
Master Flash Light Output
SPEEDLITE
580EX