RadioPopper PX - Manual (Page 15)

Menu Quick Reference
Page 15
X
X
X
P
X
P
P
P
b = Battery Level (9-1) Quickly Exit Menu
X
G1 = Group 1 Level (00-32) 1st Press: Show Current (no change); Subsequent: Adjust Level
Reduce level by pressing the “P” and “X” button down together
P
X
G2 = Group 2 Level (00-32) 1st Press: Show Current (no change); Subsequent: Adjust Level
Reduce level by pressing the “P” and “X” button down together
P
P
X
G3 = Group 3 Level (00-32) 1st Press: Show Current (no change); Subsequent: Adjust Level
Reduce level by pressing the “P” and “X” button down together
L = Light Bright Level (1-5) Cycle Levels - See result in Power light brighness
X
X
CH = Radio Chan (01-16, P1) 1st Press: Show Current (no change); Subsequent: Cycle Channels
P
H = Hardware Mode (C, n) Cycle Hardware Brand Mode - “C” = Canon Gear, “n” = Nikon Gear
F = Feedback Mode (1-3)
Exit Menu - Resume Normal Operation
P
r E = Reset Defaults
Enter Menu
P1 Clone Mode Only
Cycle - 1=Normal (stobe light on shot); 2=High Speed (no light)
X
S = Sync Interval Setting (0-9) Cycles through P1 Mode Sync Interval Settings
(Refer to P1 Owner’s Manual)
X
Hold 5 Sec Resets factory default settings. Displays firmware version on startup.
PX Transmitter Menu Quick Reference