RadioPopper PX - Manual (Page 6)

Compatible Hardware:
The PX System has been tested and found to be compatible with the following flash hardware. See our website for
updates as we test and certify compatibility with additional hardware.
Canon Master / Commander Devices:
SpeedLite Transmitter ST-E2, SpeedLite 580EX II, SpeedLite 580EX, Speedlite 550EX II SpeedLite 550EX
Canon Slave / Remote Devices:
SpeedLites 580 EX II, 580EX, 550EX II, 550EX, 430EX, 420EX
Nikon Master / Commander Devices:
SB-900 AF Speedlight, SB-800 AF Speedlight, SU-800 Wireless Speedlight Commander, Nikon “pop-up” flash used as a
Commander
(1)
Nikon Slave / Remote Devices:
SB-900 AF Speedlight, SB-800 AF Speedlight, SB-600 AF Speedlight
Note(1): Be sure to order the PX Transmitter Nikon Hot Shoe Pop-Up Flash Adapter for proper mounting
Specifications:
Both PX Transmitter and PX Receiver have similar specifications as follows.
Dimensions : 2.0” x 2.0” x 0.8” (50mm x 50mm x 20mm)
Weight: 2.0 ounces / 60 grams (Including battery and antenna during normal operation)
Battery: Two “AAA” Sized Standard Batteries / Alkaline, NiCad, or NiMH / 0.9 volt to 1.6 volt
Battery Life: Approx 25 Hours continual active transmit time for Std Alkaline battery.
Radio Frequency: 902-928 Mhz, ISM Band
Radio Range: 300 ft to 1750 ft depending on conditions and environment (2)
Note(2): Please refer to the section “Maximizing Radio Performance” (Pg. 22) in this manual for more information.
RadioPopper PX Radio Wireless System
Page 6