RearviewSafety RVS-091407 - Manual (Page 11)

12
Pairing & Connecting
Operation Guide
Pairing is not necessary as the unit has already been paired. If you
are not able to connect the camera, please try to pair the camera
by the following steps:
1. Press “Pair” button on the Wireless Digital Transmitter. You will
see the LED Blinking in RED/BLUE. The unit will
remain in Pair mode for 30 seconds
2. Go to the monitor and do the following step:
a. Press “Menu”
b. Go to “Pair Camera”
d. The unit is now in pair mode - if the unit was able to search and
connect with the camera, the
display will show “Pair OK”. If no camera is found, then the display
will show “Timed Out”.
1. Power ON/OFF
• The Dash or Mirror Monitor will automatically turn ON when it is
connected to a power source, and the camera is recieving power.
2. Connection
• Rearview image will be automatically appear on the screen
during reverse and will remain in standby
when the vehicle is in any other gear or driving forward.”