RearviewSafety RVS-091407 - Manual (Page 6)

7
Settings
Maintenance
You can adjust the contrast and brightness of the Monitor
according to your desired level.
Note: Contrast and Brightness setting ONLY works while the
backup image is on the screen.
1.To Adjust Contrast
Press the arrow key up or down
The system has 2 program functions:
1. Camera Setting
Push the Menu to pair, pairing mode will enable for 30 seconds
2. System setting
A.Power saving push menu to change the selection and hold the
Menu for long to exit
B. Brightness you can adjust the brightness of screen
C. Distance Grid, select grid line on/off
D. Default setting
Cleaning
• If dirt, rain or snow attaches to the camera, the monitor may
not clearly display objects.
• Do not use alcohol, benzene or thinner to clean the camera.
This will cause discoloration. To clean the
camera, wipe with a clean cloth dampened with mild cleaner
diluted with water and then wipe with a dry cloth.