RearviewSafety RVS-091407 - Manual (Page 8)

9
Installation Guide
Locate the reverse taillights wiring behind your reverse light.
You may need to remove the interior panel in order to locate.
You only need to attach the signal booster power wire to ONE
of the reverse lights, not both. If you cannot manually locate
the tail light cables, please contact the vehicle manufacturer or
reference a wiring diagram for your vehicle
Determine the reverse light power wires for your car, designating
the positive and negative wires.
Connecting the Power Cables:
Red wire to reverse light’s Positive wire. Connect the camera’s
Black Wire to reverse light’s Negative wire. (see Diagram C)
■ Place the fi xed adapter from the Wireless Digital
Transmitter Power Cable into the Wireless Digital Transmitter.
■ Determine the best place to mount the Transmitter. The
Transmitter is not waterproof and needs to be protected.
At your taillight, remove the light bulb socket from the reverse
light housing.
1
.
4.
2
.
3.
Determine the best route for the Camera Cable from the top of
your license plate to the Transmitter. You may need to drill a
small hole in the panel behind where the license plate is situated. 5.