RearviewSafety RVS-4000 - Manual (Page 12)

12
HARDWARE INSTALLATION cont’d
7) After all cables are inserted into recorder, connect the 12V
Alarm triggers (Blue to the dome light, Green to the taxi meter)
Red Power Cable (+)
Connected to vehicle fuse
8) Make sure vehicle ignition is off and keys are out, then connect
RED power (+) cable to vehicle fuse that is powered with ignition
(i.e radio). Connect Black Ground (-) to car chassis.
Red
(Power +)
Black (Ground -)
BLUE (Alarm1 - Optional)
Yellow (Alarm3 - Meter)
White (Speed pulse)
NO USE
Green (Alarm2 - Door)
Black Ground Cable (-)
Connected to car chassis