RearviewSafety RVS-4000 - Manual (Page 28)

28
NEW SD Memory card initializing should be done using Tool menu.
STEP1. Insert new SD memory card into
the PC.
STEP2. Run “PC Viewer BX4000”
STEP3. Select [Tool] and then click
[SD Initialize]
We recommend the [SD initialize] at least
once per month to prevent the BX4000
from any software errors.
Drive Recorder Settings
Caution Once the record setting ischanged, all recorded data
in SD card will be removed automatically.
Select Backup [YES] or [NO] before all of the recorded
data is deleted.
Initialize SD card: This prepares the SD card for use with the BX4000 system.
All data will be deleted and the set the configuration of Drive Recorder will
default to the factory settings.
Delete Record Data : All data will be deleted.