Roadi Turbo Gauge - Manual (Page 10)

8
2). View currently selected gauges on screen.
●The information available varies from vehicle to vehicle. If the
information is not available for a certain gauge, the tri p computer shows
"“---”".
●When the selected gauges are displayed for about 12 seconds, the
tri p computer records them automatically. It show these 4 gauges directly
when viewing gauges readings next time.
3). Use the upper four buttons next to any of the items or use lower-left
button to view additional data on next screen(s).
4). Press the lower-rig ht button to exit.
40 KPH 56 C WT
380 RPM 56 C IA
1). Press the button next to GAUGE to view gauge readings.
TRIP GAUGE
SCAN SETUP
5. Scan Tool
5.1.Reading Codes
(Home>Scan>DTC)
5.1.1. Erasing Codes
(Option) (Home>Scan>DTC)
1). Press the button next to SCAN to start scanning.
4.Gauges (Option)
The auto computer can be configured to measure and monitor up to
four different sets of information simultaneously, providing real-time engine
performance analysis to allow you to adjust driving behavior and improve
fuel economy.
1. Vehicle speed (KPH/MPH) 2. Manifold pressure (MAP)
3. Battery voltage (VLT) 4. Engine load (LOD)
5. Fuel Pressure (FPR) 6. Throttle position (TPS)
7. Ignition timing (IGN) 8. Intake air temperature (FIA/CIA)
9. Engine speed (RPM) 10. Closed/open loop (CLSD/OPEN LP)
11. Engine power (HPR/KW) 12. Water temperature (FWT/CWT)