Roadi Turbo Gauge - Manual (Page 5)

3
4). "←" Moves to previous digit.
5). "→" Moves to next digit; Indicates an option is selected.
6). "+"”-- Increase digit value.
7). "-"”-- Decrease digit value.
8). " "” -- Indicates average speed and average fuel consumption.
9). "
"
Indicates oil volume.
10). "---" Indicates invalid data.
2.5 Connection to the Vehicle
Follow the below steps to connect the tool to the vehicle:
1). Connect the OBD2 cable to the tool.
2). Place the tool to the position you have chosen.
3). Locate DLC on vehicle.
The DLC (Data Link Connector or Diagnostic Link Connector) is a standa-
rdized 16-cavity connector where diagnostic auto computers interface with
the vehicle's on-board computer. The DLC is usually located 12 inches
from the center of the instrument panel (dash), under or around the
driver's side for most vehicles. If Data Link Connector is not located under
dashboard, a label should be there telling location. For some Asian and
European vehicles, the DLC is located behind the ashtray and the ashtray
must be removed to access the connector. A plastic DLC cover may be
found for some vehicles and you need to remove it before plugging the
OBD2 cable. If the DLC can not be found, refer to the vehicle's service
manual for the location.
2.3 Accessories Included
1). User manual -- Instructions on tool operations
2). OBD2 cable -- Provides power to tool and communicates between
the tool and vehicle.
3). USB cable -- Connects the tool to a computer for software updates.
2.4 Navigation Characters
Characters used to help navigate the auto computer are:
1). or” -- Indicates the button next to it can be used and presses it to
do what is displayed next to it.
2).
or -- Indicates more information available on previous or next
screens.
3). "
Pd"” -- Identifies a pending code when viewing DTCs.