Roadi Turbo Gauge - Manual (Page 19)

17
●The number to the left of "→ " is the amount of fuel the auto
computer believes was used since last fill-up; the number to the rig ht of
"→"is the amount of fuel reported by fuel dispenser. Before changing the
adjustment factor, these two numbers should be the same.
7). Press SAVE to finish the adjustment, and the fuel economy will be
immediately affected by the adjustment.
•Record the adjustment factor for your vehicle if you use it in another
vehicle and then return it back to this one, so you can later adjust it back
to this one without repeating the steps above.
8.4 Rate
(Home>>Rate)
1). Press the lower-left button from HOME screen.
CBB TIME
FILLUP RATE
6). Use the button next to "“- "”or " +”" to change the adjustment
factor in 0.1% step till the number to the rig ht of → agrees with the value
reported by the fuel dispenser.
- 1.1% LITRES +
15.3 →16.6 SAVE
time when your vehicle is refueled. Make sure the tank size and the
fuel type are properly set before use this function.
1). Fill the tank in gas station and let the pump shut off automatically.
2). Press the button next to FILLUP, and press SAVE without adjusting the
indicated fuel on the first after connecting the trip computer to the vehicle.
CBB TIME
FILLUP RATE
3). Drive your vehicle normally with the auto computer connected.
4). When the tank is around 1/4 full, drive to the same gas station, use
the same fuel pump, fill up the tank at the same rate and let it shut off
automatically.
5). Press the button next to
FILLUP.
CBB TIME
FILLUP RATE