Roadi Turbo Gauge - Manual (Page 23)

21
2). Use the button next to "“-”" or "“+”" to adjust the contrast, and press
SAVE.
C. Enter Contrst Menu
1). To change the contrast of display, press the button next to CONTRAST.
3
CONTRAST SAVE
8.7 About
(Home>> >> About)
This function is used to view software version of the tool and look
up unit conversions between metric and English unit of measure.
1). Doubly press the lower-left button from the home menu, it will enter the below
menu.
B. Enter Home Menu
1). To change the display of home screen, press the button next to HOME.
MENU
Home Page Save
2). Use the upper left or upper rig ht button to select MENU to show 4
menu options in one screen, or to set the screen to show current tri p
information by selecting CURRENT TRIP, and press SAVE.
• ●It is advisable to set the home screen to show current tri p
information if you use the tri p computer in one vehicle only.
• ●If the tri p computer is set to show information of current tri p, use
the lower-rig ht button to exit current tri p display before viewing other
information, or performing setups.
2 ITEMS
Tri p Mode SAVE
2). Use the upper left or upper rig ht button to change between "2 ITEMS"
and "4 ITEMS", and press SAVE. and return to Display menu.
●X ITEMS indicates how many items are displayed in one screen
when viewing tri p information.