Crestron electronic Isys G-Series TPS-15G-QM - Manual (Page 39)

Crestron TPS-12G/15G/17G-QM Isys ® G-Series Touchpanels
General Audio Setup Details (Continued)
GENERAL
AUDIO SETUP
SCREEN
CONTROL
DESCRIPTION
Speaker Volume The volume of both audio inputs (key click and WAV) is
affected by the Speaker Volume control. If the Speaker
Volume control is set to 100% the volume for any audio
input is at maximum. If the Speaker Volume is set to 0%
the value of all audio inputs is overridden and the
touchpanel is silent. If the Speaker Volume is a
percentage (say 50%), then all audio inputs can only
achieve half their value.
Key Click Volume Adjusts the level of the key click sound with the – and +
buttons.
WAV Volume Adjusts the volume of the WAV file with the – and +
buttons. Click Play Test WAV File button to sample and
adjust the volume as a pre-loaded WAV file plays.
Headphone
Volume Adjusts the level of the headphone output with the – and
+ buttons. (This control is visible only when headphones
are connected.)
Bass Adjusts the overall bass output with the – and + buttons.
Treble Adjusts the overall treble output with the – and + buttons.
Headphone
Balance Adjusts the left/right balance of the headphone output
with the – and + buttons. (This control is visible only
when headphones are connected.)
To open the QM AUDIO INPUT SETUP menu, touch QM Inputs on the
GENERAL AUDIO SETUP menu. The QM AUDIO INPUT SETUP menu offers
controls for Prog Volume, Mic1 Volume and Mic2 Volume for both
QM Audio 1 and QM Audio 2 inputs.
The Restore Default Audio Settings button returns all audio parameters for the QM
inputs to their default settings. After QM AUDIO INPUT SETUP parameters have
been set, touch Return to go back to the SETUP MENU.
Operations Guide – DOC. 6415B Isys ® G-Series Touchpanels: TPS-12G/15G/17G-QM • 35