Crestron electronic Isys G-Series TPS-15G-QM - Manual (Page 40)

Isys ® G-Series Touchpanels Crestron TPS-12G/15G/17G-QM
QM AUDIO INPUT SETUP
Refer to the following table for additional QM AUDIO INPUT SETUP menu details.
QM Audio Input Setup Details
QM AUDIO
INPUT SETUP
SCREEN
CONTROL
DESCRIPTION
INPUT SELECT
QM AUDIO 1
QM AUDIO 2
Selects QM audio source. This selection determines
whether QM 1 or QM 2 inputs are displayed.
Restore Default
Audio Settings Returns audio settings to their factory defaults.
Mute A separate Mute button is provided for each of the
volume controls.
QM 1 / QM 2 Prog
Volume Adjusts the level of the respective QM input with the –
and + buttons.
QM 1 / QM 2 Mic1
Volume Adjusts the level of Mic1 on the respective QM input with
the – and + buttons.
QM 1 / QM 2 Mic2
Volume Adjusts the level of Mic2 on the respective QM input with
the – and + buttons.
To open the QM AUDIO OUTPUT SETUP menu, touch QM Output on the
GENERAL AUDIO SETUP menu. The QM AUDIO OUTPUT SETUP menu offers
controls for Program Gain, Transmit QM ID and a four-band Speech EQ Trims
equalizer.
The Restore Default Audio Settings button returns all audio parameters for the QM
output to their default settings. After QM AUDIO OUTPUT SETUP parameters
have been set, touch Return to go back to the SETUP MENU.
36 • Isys ® G-Series Touchpanels: TPS-12G/15G/17G-QM Operations Guide – DOC. 6415B