Cambridge Audio A-BUS Table-Top Keypad Incognito BK10 - Manual (Page 12)

The six LEDs indicate the
volume level of the BK10. The LEDs
also also display the source selected
when the source is changed and can
also show the status of some other
functions. For full instructions on
volume adjustment, source selection,
sound adjustment and local source
selection modes, refer to the
‘Operating instructions’ section of this
guide.
Standby/On
Press to switch the keypad between
On and Standby mode. By pressing
and holding the Standby button for
about 2 seconds, all BK10s
connected to the AH10 hub will be
turned off. If the BK10 is connected to
a Cambridge Audio Incognito Ready
Amplifier rather than an AH10 hub,
the amplifier will be turned off.
Volume up
Press to increase the volume or other
sound adjustment.
Source select (right)
Use this key to select the current
active source.
KEYPAD CONTROLS
1
2
3 4
5
6
7
8
10
11
9
12
1 6
7
8
9
12 Incognito table-top keypad
-