Cambridge Audio A-BUS Table-Top Keypad Incognito BK10 - Manual (Page 18)

Input impedance 45 k ohms
Frequency response 20Hz – 20kHz +/- 1dB
THD <0.2% @ 1W, 20Hz – 20 kHz
S/N ratio > 80 dB ‘A’ weighted
Volume control range - 80 dB, 36 steps
Bass control range +/- 16 dB, 2 dB steps
Treble control range +/- 16 dB, 2 dB steps
Balance control range +/- 40 dB, 9 steps either way
Preamp output Variable level, follows volume setting
IR pass through 34–40 kHz and 54–58 kHz
modulation frequencies supported
Speaker impedance 4–8 ohms
Power requirement 24 V DC @ 1A max (supplied by hub)
This guide is designed to make installing and using this product as easy as possible. Information in this
document has been carefully checked for accuracy at the time of printing; however, Cambridge Audio's policy is
one of continuous improvement, therefore design and specifications are subject to change without prior
notice. If you notice any errors please feel free to email us at: [email protected]
This document contains proprietary information protected by copyright. All rights are reserved. No part of this
manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written
permission of the manufacturer. All trademarks and registered trademarks are the property of their respective
owners.
Incognito and Incognito Ready are trademarks of Cambridge Audio Ltd. All rights reserved.
© Copyright Cambridge Audio Ltd 2006
A-BUS and A-BUS Ready are registered trademarks of LeisureTech Electronics Pty Ltd Australia.
TECHNICAL SPECIFICATIONS
18 Incognito table-top keypad