Cambridge Audio A-BUS Table-Top Keypad Incognito BK10 - Manual (Page 7)

BK10 Table-top keypad
Incognito table-top keypad 7
The BK10 comes with 10 metres of Cat5 connection cable, but an Incognito
CP20 cable pack (with 20 metres of cable, 2 x 3.5-3.5 connection cables and a
punch-down/wire stripper tool) can be purchased separately.
To allow control of your source equipment from the remote rooms an IR emitter
(IR10) is plugged into one of the IR outputs on the rear of the unit and then
attached over the IR window of the source unit. Alternatively, on our own
products that feature IR emitter Inputs, a mini-jack to mini-jack lead can be
used.
Commands received by the keypads can now be sent back to the source
equipment via the amplifier. It is then possible to control the source equipment
from the remote rooms by using the source equipment's own remote controls
or through a learning remote. The Incognito LR10 Learning Remote can fully
control the keypads, “learn” the source's remote controls and change source
input on the amplifier etc.
Speaker
cable
Cat5/5e
cable