HONDA CRF50F - Manual (Page 100)

(1)
(2)
(5)
(4)
(3)
(6)
(4) front axle nut
(5) lug
(6) slot (1) brake adjusting nut
(2) brake cable
(3) brake arm
92
Wheels
Servicing Your Honda
Front Wheel Removal
Rotate the wheel slowly to see if it appears
to ‘‘wobble.’’ If it does, the rim is out of
round or not ‘‘true.’’ If the wobble is
noticeable, see your dealer for inspection. Removal
Raise the front wheel off the ground by
placing a maintenance stand or support block
under the engine. Secure the rear of the
motorcycle with tie-down straps.
Remove the front fork protector (page
).
Unscrew the front brake adjusting nut ( ).
Pull the front brake lever in and disconnect
the brake cable ( ) from the brake arm ( ).
Remove the front axle nut ( ) and front axle
shaft.
Pull the brake assembly out carefully.
Remove the wheel.
Take care to prevent getting grease, oil, or dirt
on the brake shoe surfaces. This can cause poor
brake performance or rapid brake shoe wear
after reassembly.
1.
2.
3.
3.
4.
5.
6.
57
1
2 3
4