HONDA CRF50F - Manual (Page 103)

35 lbf·ft (46 N·m , 4.8 kgf·m)
RIGHT REAR
(8)
(9)
(10)
(8) lug
(9) slot
(10) brake panel
95
Wheels
Servicing Your Honda
Installation
Reverse the removal procedure. Make sure
the lug ( ) on the swingarm is located in the
slot ( ) in the brake panel (
). Check that
the chain adjusters are installed properly.
Adjust the drive chain (page
).
Adjust the rear brake (page ).
Apply the rear brake, release it, then spin the
wheel and check that it rotates freely. Repeat
this procedure several times.
If a torque wrench was not used to install the
wheel, see your dealer as soon as possible to
verify proper assembly. Improper assembly
may lead to loss of braking capacity.
Torque the rear axle nut to:
2.
3.
4.
1.
5.
8
9 10
88
104